BluPlusPlus Slide Tab
|
Additional information about the options on the Slide tab is presented
two ways:
- Hover over option on the figure below for
a tooltip explaining the option.
- Click on any option on the figure below to
be taken to additional information on the selected GUI element.
|
|
| GUI Element: |
Include Slide Show |
 |
| Purpose: |
Specifies whether to enable the automatic Slide Show |
| Values: | true/false |
| Defaults: |
true |
| Notes: | n/a |
| GUI Element: |
Cyclic Slide Show |
 |
| Purpose: |
Specifies whether a slide show should cycle indefinitely or
should stop after reaching the last slide in the folder. |
| Values: |
true/false |
| Defaults: |
true |
| Notes: | n/a |
| GUI Element: |
Slide Show Delay |
 |
| Purpose: |
Specifies in seconds the delay between slides WITHOUT comments
when the Slide Show is enabled (see Include Slide
Show) |
| Values: |
any number |
| Defaults: | 4 |
| Notes: | n/a |
| GUI Element: |
Delay on Movie |
 |
| Purpose: |
Specifies in seconds the delay for a movie slide
when the Slide Show is enabled (see Include Slide
Show) |
| Values: |
any number |
| Defaults: |
15 |
| Notes: | n/a |
| GUI Element: |
Delay on Comments |
 |
| Purpose: |
Specifies in seconds the delay between slides WITH comments
when the Slide Show is enabled (see Include Slide
Show) |
| Values: |
any number |
| Defaults: | 4 |
| Notes: | n/a |
| GUI Element: |
Slide HTML Title |
 |
| Purpose: |
Specifies what displays in the browser title bar on slide pages |
| Values: |
Any or all of the following may be set (if more than one is specified, they
must be separated by either ‘|’, ‘,’ or ‘;’):
- AlbumTitle: The title of the album as specified on the BluPlusPlus General tab
- FolderTitle: The name of the containing folder
- Title: Title of the image
- FileName: Real file name of the image file
- FileType: Extension of the image file (e.g. ‘.jpg’)
- Date: If present in EXIF data, the date the image was taken by the camera; otherwise,
the image file modification date
- Dimension: Dimensions (in pixels) of the original image
- SlideDimension: Dimension (in pixels) of the slide image
- FileSize: File size of the original image
- any EXIF/IPTC field: A full EXIF/IPTC field name
|
| Defaults: | AlbumTitle|FolderTitle|Title |
| Notes: | If no title is specified on the JAlbum
main window or in a meta.properties file,
Title and FileName are the same.
If ‘none’ is specified in this field the browser title bar will display the
name of the slide image file (usually ‘slideimagename.html’) |
| GUI Element: |
Breadcrumb Trail Content |
 |
| Purpose: |
Allows for the customization of the tex display for the current image in the
top bar |
| Values: |
Any or all of the following may be set (if more than one is specified, they
must be separated by either ‘|’, ‘,’ or ‘;’):
- AlbumTitle: The title of the album
- FolderTitle: The name of the containing folder
- Title: Title of the image
- FileName: Real file name of the image file
- FileType: Extension of the image file (e.g. ‘.jpg’)
- Date: If present in EXIF data, the date the image was taken by the camera; otherwise,
the image file modification date
- Dimension: Dimensions (in pixels) of the original image
- SlideDimension: Dimension (in pixels) of the slide image
- FileSize: File size of the original image
- any EXIF/IPTC field: A full EXIF/IPTC field name
|
| Defaults: |
AlbumTitle|FolderTitle|Title |
| Notes: | If no title is specified on the JAlbum
main window or in a meta.properties file,
Title and FileName are the same.
If ‘none’ is specified in this field the browser title bar will display the
name of the slide image file (usually ‘slideimagename.html’) |
| GUI Element: |
Include Thumbnails |
 |
| Purpose: |
Specifies whether thumbnails images of the next few/previous
few slides are included on the slide image pages |
| Values: | true/false |
| Defaults: |
true |
| Notes: | n/a |
| GUI Element: |
Thumbnail Count |
 |
| Purpose: | Specifies how many thumbnails images of the next few/previous
few slides are shown on the slide image pages |
| Values: | Any number |
| Defaults: | 5 (up to 5 next and up to 5 previous thumbnails are shown,
for a total of up to 10) |
| Notes: | n/a |
| GUI Element: |
Thumbnail Ratio |
 |
| Purpose: |
Specifies the size of the thumbnail images on slide pages as a multiple
of the size of the thumbnail images on the index pages |
| Values: | Any number |
| Defaults: |
.5 (that is, the height and width of the slide thumbs will be half the height
and width of the index thumbs) |
| Notes: |
This variable has no effect if includeSlidePageThumbnails is
set to ‘no’ |
| GUI Element: |
Movie Slides Dimension |
 |
| Purpose: |
Specifies width and height of the movie display window |
| Values: |
Choose from several presets or type in any desired values |
| Defaults: |
640x480 |
| Notes: |
Some experimentation may be needed to ensure that various movie
formats display as desired |
| GUI Element: |
Prefetch Sibling Slides |
 |
| Purpose: |
Specifies whether the next and previous slide images should be prefetched |
| Values: |
true/false |
| Defaults: |
true |
| Notes: |
“Prefetching” means that the next and previous slide images
will be loaded “behind the scenes” as a given slide is being viewed.
This is particularly valuable for users on a slower, dial-up internet connection.
|
| GUI Element: |
Include Page Blending/Fading |
 |
| Purpose: |
Specifies whether the fade in/fade out blending effect is activated
on slide pages |
| Values: | true/false |
| Defaults: |
true |
| Notes: |
This feature only works with Internet Explorer on a PC |
| GUI Element: |
Include Move Forward Facility |
 |
| Purpose: |
Specifies whether to enable the ability to move to the next
slide when a slide image is clicked. |
| Values: | true/false |
| Defaults: |
true |
| Notes: |
This feature works only if “Link to originals via scaled
images” is NOT enabled on the JAlbum Main
tab. |
| GUI Element: |
Slide Caption Content |
 |
| Purpose: |
Specifies what information appears directly below images on
slide pages |
| Values: |
Any or all of the following may be set; if more
than one is specified, they must be separated by either ‘|’, ‘,’,
‘~’ , or ‘;’ (a double symbol— ‘||’, ‘,,’, ‘~~’ ,
or ‘;;’ forces a line break):
- Title: Title of the image
- FileName: Real file name of the image file
- FileType: Extension of the image file (e.g. ‘.jpg’)
- Date: If present in EXIF data, the date the image was taken by
the camera; otherwise, the image file modification date
- Dimension: Dimensions (in pixels) of the original image
- SlideDimension: Dimension (in pixels) of the slide image
- FileSize: File size of the original image
- any EXIF/IPTC field: A full EXIF/IPTC field name
|
| Defaults: |
FileName|Dimension|FileSize||Date (note: the double bar (‘||’)
is not an error!) |
Notes:
|
The parameter separators may be mixed. For example, the following
is valid: FileName|Dimension|FileSize~~Date
If no title is specified on the JAlbum main window or
in a meta.properties file, Title and FileName
are the same.
Specifying “none” (without the quotes) will cause BPP not to
display any caption.
More information about EXIF/IPTC information is available here. |
| GUI Element: |
Breadcrumb Trail Content |
 |
| Purpose: |
Specifies what appears in the breadcrumb trail in the top bar after the word “Viewing...” |
| Values: |
Any one of the following may be set:
- Title: Title of the image
- FileName: Real file name of the image file
- any EXIF/IPTC field: A full EXIF/IPTC field name
|
| Defaults: |
Title |
| Notes: |
If no title is specified on the JAlbum
main window or in a meta.properties file, Title
and FileName are the same.
More information about EXIF/IPTC information is available here. |
| GUI Element: |
Enable Slide Content |
 |
| Purpose: |
Specifies whether the slide comment section is enabled or disabled |
| Values: |
true/false |
| Defaults: |
true |
| Notes: |
|
| GUI Element: |
Slide Comment Horizontal Alignment |
 |
| Purpose: | Specifies the relative horizontal position of slide comments |
| Values: | Left/Center/Right |
| Defaults: | Left |
| Notes: | n/a |
| GUI Element: |
Slide Comment Vertical Position |
 |
| Purpose: | Specifies the relative vertical position of slide comments |
| Values: |
TOP_ABOVE_NAVIGATION/TOP_UNDER_NAVIGATION/BOTTOM (be sure to use all caps) |
| Defaults: | TOP_UNDER_NAVIGATION |
| Notes: | Slide comments can be placed in one of three positions on
the slide image page: (1) immediately above the navigation icons, (2) immediately
below the navigation icons, and (3) below the slide image |
|